Jigsaw Blades Shank for Bosch a.o.
G-MAN jigsaw blades are specially designed for a wide variety of applications:
Carbon steel blades with cross sharpened and set teeth enable fastercutting than blades with milled and set teeth. Suitable for both wood and plastics.
Carbon steel blades with cross sharpened teeth and conical ground are used for accurate and clean cuts in both wood and plastics.
Bi-metal blades are available for cutting metals, clean wood and nail-embedded wood.
Tungsten carbide blades are intended for use with hardwearing materials such as tiles, plaster, fibreglass, eternite and building brick, etc.
2002-0725GM (T101B)
 Carbon Steel, Cross sharpened teeth, Conical ground |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,5 | 10 | 2,5 | Clean cutting in wood, plywood, chipboards and plastics. |
2002-0740GM (T101D)
 Carbon Steel, Cross sharpened teeth, Conical ground |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,5 | 6 | 4,0 | Fast and clean cutting in wood, plywood, chipboards and plastics. |
2002-0799GM (T101BR)
 Carbon Steel, Cross sharpened teeth, Conical ground |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack | 75 x 8 x 1,5 | 10 | 2,5 | Reversed toothing. Non-splitting cuts in laminates. Clean cutting. |
2002-0840GM (T301CD)
 Carbon Steel, Cross sharpened teeth, Conical ground |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack | 85 x 8 x 1,5 | 6 | 4,0 | Fast and clean cutting in wood, chipboards and plastics. |
2002-0900GM ( – )
Carbon Steel, Cross sharpened teeth, Conical ground |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
93 x 9,5 x 1,5 |
Progressive toothed and conical ground for fast cuts in soft wood, chipboards etc. |
||
2002-1040GM (T301DL)
 Carbon Steel, Cross sharpened teeth, Conical ground |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack | 105 x 10 x 1,5 | 6 | 4,0 | Fast and clean cutting in wood and plastics. |
2003-0740GM (T144D)
 Carbon Steel, Cross sharpened, Set teeth |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,3 | 6 | 4,0 | Fast and coarse cutting in wood, plywood and chipboards. |
2003-1240GM (T344D)
 Carbon Steel, Cross sharpened, Set teeth |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
125 x 9 x 1,3 | 6 | 4,0 | Fast and coarse cutting in wood, plywood and chipboards. |
2003-1540GM ( – )
 Carbon Steel, Cross sharpened, Set teeth |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
155 x 9 x 1,5 | 6 | 4,0 | Fast and coarse cutting in wood, plywood and chipboards. |
2004-0740GM (T244D)
 Carbon Steel, Cross sharpened, Set teeth |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 6 x 1,3 | 6 | 4,0 | Fast and coarse cutting in wood, plywood and chipboards. Contour cutting. |
2005-0513GM (T101AO)
 Carbon Steel, Cross sharpened teeth, Conical ground |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack | 50 x 5 x 1,3 | 20 | 1,3 | Clean contour cutting in wood, plywood and plastics. |
2007-0725GM ( – )
 Carbon Steel, Cross sharpened teeth, Conical ground |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack | 75 x 8 x 1,3 | 10 | 2,5 | Contour cutting in wood, plywood and chipboards. (The blade has a toothed back). |
2009-0740GM (T101DP)
 Carbon Steel, Cross sharpened teeth, Conical ground |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,7 | 6 | 4,0 | Precise parallell cuts in wood, chipboards and plastics. |
2013-1500-002GM
 |
||||
| Packing | Dimension mm |
Recommended use |
||
| 2-pack |
150 x 8 x 1,0 |
Rubber, cellular plastics, leather |
||
2015-0512GM (T118AF)
 Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
50 x 8 x 1,0 | 21 | 1,2 | Clean cutting in metal profiles and sheet metals thinner than 4 mm. |
2015-0520GM (T118BF)
 Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
50 x 8 x 1,0 | 13 | 2,0 | Clean cutting in metal profiles and sheet metals 3–6 mm thick. |
2015-0700GM (-)
|
Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
77 x 8,6 x 1 |
Progressive bi-metal blade for metal sheet between 3-15 mm, tubes and profiles <30 mm. |
||
2015-0730GM (T127DF)
 Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,0 | 8 | 3,0 | Nail-embedded wood, plastics, aluminium. Soft metals 5–10 mm thick. |
2015-1012GM (T318AF)
 Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
100 x 8 x 1,0 | 21 | 1,2 | Clean cutting in metal profiles and sheet metals thinner than 4 mm. Sandwich materials. |
2015-1020GM (T318BF)
 Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
100 x 8 x 1,0 | 13 | 2,0 | Clean cutting in metal profiles and sheet metals 3–6 mm thick. Sandwich materials. |
2015-1100GM (-)
|
Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
108 x 10 x 1,25 |
Progressive bi-metal blade for nail inbeded wood, profiles and tubes between 3-10 mm. |
||
2015-2010GM ( – )
 Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
200 x 8 x 1,0 | 24 | 1,0 | Clean cutting in metal profiles and sheet metals thinner than 4 mm. Sandwich materials. |
2016-0740GM (T144DF)
 Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,3 | 6 | 4,0 | Fast and coarse cutting in wood, plywood, chipboards and glued panels. |
2017-0725GM (T101BF)
 Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,3 | 10 | 2,5 | Clean cutting in wood, plywood, chipboards, glued panels and fibreglass. |
2019-0502GM (T130RIFF)
 Tungsten Carbide |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 1-pack | 55 x 8 x 1,0 | Tungsten Grit | Ceramics, tiles, glass. | |
2019-0740GM (T141HM)
 Tungsten Carbide |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 1-pack |
70 x 8 x 1,3 | 6 | 4,0 | Coarse cutting in hard wood, plaster, fibreglass and bricks. |
2019-1040GM (T341HM)
 Tungsten Carbide |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 1-pack |
100 x 8 x 1,3 | 6 | 4,0 | Coarse cutting in hard wood, plaster, fibreglass and bricks. |