Jigsaw Blades 1/4" Universal Shank
G-MAN jigsaw blades are specially designed for a wide variety of applications:
Carbon steel blades with cross sharpened and set teeth enable fastercutting than blades with milled and set teeth. Suitable for both wood and plastics.
Carbon steel blades with cross sharpened teeth and conical ground are used for accurate and clean cuts in both wood and plastics.
Bi-metal blades are available for cutting metals, clean wood and nail-embedded wood.
Tungsten carbide blades are intended for use with hardwearing materials such as tiles, plaster, fibreglass, eternite and building brick, etc.
2022-0725GM
 Carbon Steel, Cross sharpened teeth, Conical ground |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,5 | 10 | 2,5 | Clean cutting in wood, plywood, chipboards and plastics. |
2022-0740GM
 Carbon Steel, Cross sharpened teeth, Conical ground |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,5 | 6 | 4,0 | Fast and clean cutting in wood, plywood, chipboards and plastics. |
2022-0799GM
 Carbon Steel, Cross sharpened teeth, Conical ground |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,5 | 10 | 2,5 | Reversed toothing. Non-splitting cuts in laminates. Clean cutting. |
2023-0740GM
 Carbon Steel, Cross sharpened, Set teeth |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,3 | 6 | 4,0 | Fast and coarse cutting in wood, plywood and chipboards. |
2027-0740GM
 Carbon Steel, Cross sharpened, Set teeth |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,3 | 6 | 4,0 | Contour cutting in wood, plywood and chipboards. (The blade has a toothed back). |
2035-0512GM
 Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
50 x 8 x 1,0 | 21 | 1,2 | Clean cutting in metal profiles and sheet metals thinner than 4 mm. |
2035-0520GM
 Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
50 x 8 x 1,0 | 13 | 2,0 | Clean cutting in metal profiles and sheet metals 3–6 mm thick. |
2035-0730GM
 Bi-metal |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 5-pack |
75 x 8 x 1,0 | 8 | 3,0 | Nail-embedded wood, plastics, aluminium. Soft metals 5–10 mm thick. |
2039-0502GM
 Tungsten Carbide |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 1-pack |
55 x 8 x 1,0 | Tungsten Grit | Ceramics, tiles, glass. | |
2039-0740GM
 Tungsten Carbide |
||||
| Packing | Dimension mm |
Teeth
/inch |
Tooth pitch mm | Recommended use |
| 1-pack | 70 x 8 x 1,3 | 6 | 4,0 | Coarse cutting in hard wood, plaster, fibreglass and bricks. |